Concrete Surface Repair Products

Adhesive plaster TL

The Fescon Adhesive Plaster is a cement-based, polymer-modified, cement-based dry mortar with additives. The maximum grain size is 0.6 mm.

Get familiar with our product

Non-run filling plaster VTL

A cement-based, polymer-modified fibre plaster for the repair of deep pits and corners in concrete structures. Largest grain size 1.2 mm.

Get familiar with our product

Repairing plaster KL 1.2

A cement-based, polymer-modified repairing plaster for the repair of damage, pits and casting defects in concrete structures, and the coating of walls, floors, stairs, plinths, and other such concrete surfaces. Largest grain size 1.2 mm or 3.0 mm. Estimated usage: 1 mm layer 1.6 kg/m².

Get familiar with our product

Repairing plaster KL 3.0

A cement-based, polymer-modified repairing plaster for the repair of damage, pits and casting defects in concrete structures, and the coating of walls, floors, stairs, plinths, and other such concrete surfaces. Largest grain size 1.2 mm or 3.0 mm. Estimated usage: 1 mm layer 1.6 kg/m².

Get familiar with our product

Repairing plaster KL 40

A polymer-modified repair plaster with cement binder for grading corrections of balconies and the repairs and patching of concrete structures. Maximum grain size 1.2 mm. Compressive strength around 40 MPa. Estimated usage: 1 mm layer 1.6 kg/m².

Get familiar with our product

Overlevelling plaster YTL

A polymer-modified plaster with cement binder for the levelling and thin-layer plastering of lightweight aggregate and concrete block structures and concrete surfaces. Maximum grain size 0.6 mm. Levelling work 5-10 kg/m² (depending on how even the wall is). Thin-layer plastering 6-8 kg/m² / 2 layer applications.

Get familiar with our product

Corro shotcrete RKB

Fescon Corro Shotcrete RKB is a multi-purpose, strength-rated, non-sag and fibre-reinforced special concrete. It can be used for the repair and coating of concrete structures on floors, walls and ceilings. Suitable for indoor and outdoor use. It is also suitable for use as cast concrete and sprayed concrete in applications where high strength and good weather-resistance are required. Maximum grain size 3.0 mm. Strength class C30/37. SILKO approved. Material usage approx. 2.0 kg/m²/1 mm. Good adhesive properties (adhesive class R3).

Get familiar with our product

Korrogard R 0.6 mm

A polymer-modified, fibre-reinforced levelling and protective plaster for concrete structures. SILKO-approved.

Get familiar with our product

Korrogard R 1.2 mm

A polymer-modified, fibre-reinforced repair plaster for concrete structures. SILKO-approved.

Get familiar with our product

Korrogard R 3.0 mm

A polymer-modified, fibre-reinforced repair plaster for concrete structures. SILKO-approved.

Get familiar with our product

Korroshot D KSD 5.0 mm

A polymer-modified, fibre-reinforced special concrete for shotcreting using the dry spray method. SILKO-approved.

Get familiar with our product

Products

Enter amount

units
Add