Repairing plaster KL 40

Product description

The Fescon Repairing Plaster 40 is a cement-based, polymer-modified, cement concrete with additives. The maximum grain size is 1.2 mm.

 

  • easy to use
  • good grip on the base
  • good workability characteristics

Applications

  • grading corrections of balcony slabs and terraces
  • repairs of concrete floors and surfaces
Vinkki! Vieritä taulukkoa sivuttain
EAN code Product name Product number Package size
6416841450197 Repairing plaster KL 40 45019 25 kg

Instructions

Refer to the bag for how much water the plaster requires. Add the dry material to the water and mix with a concrete mixer for around ten minutes. With a power mixer or a drill paddle, around one to two minutes of mixing is sufficient. Allow the plaster to stand for around ten minutes and mix it again for a short while. Find the correct consistency at this stage by gradually adding the rest of the water. We do not recommend adding all of the water right at the start. The finished plaster remains workable for around one hour.

Remove damaged coating and damaged concrete, for example by chiselling, milling or water sand blasting. Uncover any rusted reinforcements and clean them to grade St 2 or, if necessary, replace them with new ones. Apply one or two layers of Fescon Adhesive Plaster to the cleaned reinforcement bars. Repair cavities using Fescon Repairing Plasters. Clean the base of loose dust and dirt, for example by pressure washing. The surface must be damp enough to be darker in colour before grade correction work begins. The best time to wet the surface is the previous night.

Spread the Repairing Plaster 40 over the base and shape the grading with a steel trowel, for example. The recommended thickness of one fill is 2-15 mm. Do larger fills in layers so that you allow the lower layer dry until the next day before applying a new layer. If necessary, dampen the surface before spreading the plaster. Depending on the working conditions and layer thickness, finish the surface after 30-60 minutes of spreading the plaster with a wooden float or a steel trowel. In order to ensure the adhesion of the repairing plaster, we recommend using Fescon Adhesive Plaster. Apply the repairing plaster before the Adhesive Plaster has dried, or after the Adhesive Plaster has fully dried (1-2 days depending on the conditions).

Keep the plaster surface damp by spraying it with water and covering it with a plastic film for at least two days. The need for aftercare depends on the conditions. Begin aftercare when the plaster is dry to the touch.

Waste handling

Hardened product and empty, dry packages can be delivered to a landfill. A liquid product must be delivered to a hazardous waste reception point.

Technical information

Material usage

1.8 kg/m²/mm

Water requirement 2.8-3.0 l/25 kg
Type powder
Colour grey
Maximum grain size

1.2 mm

Package size 25 kg
Storage

storage time in a dry location approx. 1 year

Layer thickness 2-15 mm
Lowest usage temperature

+ 5°C

Workability time approx. 1 h
Compressive strength

approx. 40-50 MPa (prism 28 days)

Adhesion strength

> 1.5 MPa

Shrinkage

approx. 0.8 ‰ (28 days prism)

Fire class A2

References

Other links

The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.

Products

Enter amount

units
Add