Dry concretes and cement plasters

Thin plaster S 06

For the repair and patching of casting defects, and the repair and surface patching of concrete walls and roofs. Maximum grain size 0.6 mm. Ready-to-apply compound 13-14 l/25 kg.

Get familiar with our product

Cement plaster S 30

Suitable for casting thin surface flooring and corridor tiles, and the repair of casting defects and concrete structures. Maximum grain size 3 mm. Compressive strength C 25/30 (K30). Ready-to-apply compound 12–13 l/25 kg. Frost-resistant

Get familiar with our product

Corro concrete K 30

Special concrete C 25/30 for (K 30) strength class casting. Frost-resistant Good wear resistance and tightness. Maximum grain size 3 mm. Ready-to-apply compound around 500 l/1000 kg. Grain size 10 mm also available to order (only in 1000 kg packages).

Get familiar with our product

Corro concrete K 45

Special concrete C 35/45 for (K 45) strength class casting. Frost-resistant Good wear resistance and tightness. Maximum grain size 3 mm. Ready-to-apply compound 11-12 l/25 kg. Grain size 10 mm also available to order (only in 1000 kg packages).

Get familiar with our product

Cement concrete S 100

Basic concrete for general casting work. Maximum grain size 10 mm. Compressive strength around 25 MPa. Ready-to-apply compound 12-13–25 l/25 kg. Frost-resistant

Get familiar with our product

Grouting concrete JB 600/3

High-strength concrete that expands before setting, intended for grouting and supplementary casting in narrow and difficult spaces. The main applications are installation and jointing casting of pre-cast concrete elements and various anchor grouts. Maximum grain size 3 mm. Strength class C 50/60 (K 60). SILKO-approved. Ready-to-apply compound 11-12–25 l/25 kg. Meets the requirements of the R4 class.

Get familiar with our product

Grouting concrete JB 1000/3

A very high-quality concrete for demanding precision casting, such as the fastening and installation castings of machinery. Due to slight expansion that takes place before setting, the concrete fills the casting space well. Largest grain size 3 mm. Strength class C 65/80 (K 80). Ready-to-apply compound 11-12 l/25 kg. SILKO-approved. Meets the requirements of the R4 class.

Get familiar with our product

Vertical-joint concrete PSB K30

A non-sag, pumpable special compound for the vertical grouting of concrete elements. Frost-resistant Largest grain size 3 mm. Ready-to-apply compound ca. 500 l/1000 kg. Strength class C 25/30 (K 30).

Get familiar with our product

Vertical-joint concrete PSB K40

A non-sag, pumpable special compound for the vertical grouting of concrete elements. Frost-resistant Largest grain size 3 mm. Ready-to-apply compound ca. 500 l/1000 kg. Strength class C 30/37 (K 40).

Get familiar with our product

Rapid concrete PB

A special concrete with a rapid strength gain that is suited to, for example, repairs of concrete structures, supplementary casting and floor casting. Strength class C 30/37. Largest grain size 3 mm. Ready-to-apply compound 11-12 l/25 kg. Grain size 10 mm also available to order.

Get familiar with our product

SILKO Corro SKC C35/45

Special concrete for demanding casting applications with salt and frost stress. Largest grain size 10 mm. Strength class C 35/45 (K 45). SILKO-approved

Get familiar with our product

SILKO Rapid Corro SPC C35/45

Rapidly hardening special plaster for demanding applications. Largest grain size 3mm. Strength class C 35/45 (K 45). SILKO-approved.

Get familiar with our product

Bolting plaster

Pumpable special plaster with cement binder for bolting during quarrying. Also available in a sulphate-resistant grade.

Get familiar with our product

Vertical-joint concrete winter TPSB K30

A non-sag, pumpable special compound for the vertical grouting of concrete elements in winter conditions. Frost-resistant Largest grain size 3 mm. Ready-to-apply compound ca. 500 l/1000 kg. Working temperature –15°C … + 5°C. Strength class C 25/30 (K30).

Get familiar with our product

Vertical-joint concrete winter TPSB K40

A non-sag, pumpable special compound for the vertical grouting of concrete elements in winter conditions. Frost-resistant Largest grain size 3 mm. Ready-to-apply compound ca. 500 l/1000 kg. Working temperature – 15°C … + 5°C. Strength class C 32/40 (K40).

Get familiar with our product

Grouting concrete TJB Winter

Special concrete that expands before setting for grouting and small-scale concrete work and anchor grouting. Maximum grain size 3 mm. Strength class C40/50 (K 50). Ready-to-apply compound 11-12–25 l/25 kg. Working temperature +5°C...-15°C.

Get familiar with our product

Winter concrete TB S 30

Special concrete for grouting and concrete work. Frost-resistant Largest grain size 3 mm. Strength class C 25/30 (K 30). Ready-to-apply compound ca. 500 l/1000 kg. Working temperature +5°C...-15°C.

Get familiar with our product

Winter concrete TB S 40

Special concrete for grouting and concrete work. Frost-resistant Largest grain size 3 mm. Strength class C 32/40 (K 40). Ready-to-apply compound 11–12 l/25 kg. Working temperature +5°C...-15°C.

Get familiar with our product

Products

Enter amount

units
Add