Corro concrete K 30
Product description
Fescon Corro Concrete K30 is a cement concrete for casting applications requiring frost resistance and strength-rated concrete. The maximum grain size is either 3.0 mm or 10.0 mm.
- Easy to use
- Frost-resistant
- Good workability characteristics
Applications
- Foundations and foundation bases
- Repair of concrete structures
- Stairs
- Jointing of natural stones
- Floors
The product is listed in the portal for building products that can be used in Nordic Swan Ecolabelled buildings.
Vinkki! Vieritä taulukkoa sivuttain
|
6416841330130
|
CORRO CONCRETE K 30
|
33013
|
1000 kg
|
Mixing
Refer to the bag for how much water the concrete requires. Add the dry material to the water and mix with a concrete mixer for around three to five minutes. With a power mixer, around one to three minutes of mixing is sufficient. Let the plaster stand for around five minutes and mix it again for a short while. Find the correct consistency at this stage by gradually adding the rest of the water. We do not recommend adding all of the water right at the start. The finished concrete remains workable for around one hour.
Preparations
Mould and reinforcement work is done according to the normal working methods and
the instructions of the designers.
Casting
Casting work is done according to the normal working methods, the instructions of the designers and official regulations.
After treatment
You must care for the fresh casting by spraying with water or by protecting it with a plastic film that prevents excessive evaporation of moisture. The need for aftercare depends on the conditions. It should continue for at least two days.
Waste handling
Waste is collected mechanically and disposed of in accordance with local instructions. Hardened waste is handled as construction waste.
| Material usage |
90 kg/m2 with a 50 mm layer thickness |
| Water requirement |
2.5-2.9 l/25 kg (3 mm) 2.0-2.4 l/25 kg (10 mm) |
| Finished compound |
11 - 12 l / 25 kg bag |
| Type |
powder |
| Colour |
grey |
| Maximum grain size |
3 mm or 10 mm |
| Storage |
storage time in a dry location approx. 1 year |
| Lowest usage temperature |
+ 5°C |
| Workability time |
1 h |
| Strength class |
C 25/30 |
| Fire class |
A1 |
| Exposure class |
XC 2, XF 3 (100 years) |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.