Cement concrete S 100
Product description
Fescon Cement Concrete S 100 is a cement concrete suitable for the most common casting work in buildings. The maximum grain size is 10 mm.
- Easy to use
- Good workability characteristics
- Frost-resistant
Applications
- Foundations
- Stairs
- Foundation bases
- Floors
The product is listed in the portal for building products that can be used in Nordic Swan Ecolabelled buildings.
Vinkki! Vieritä taulukkoa sivuttain
|
6416841530219
|
CEMENT CONCRETE S 100
|
53021
|
25 kg
|
|
6416841330963
|
CEMENT CONCRETE S 100
|
33096
|
500 kg
|
|
6416841330215
|
CEMENT CONCRETE S 100
|
33021
|
1000 kg
|
Refer to the bag for how much water the concrete requires. Add the dry material to the water and mix thoroughly. The mixing is usually done with a concrete mixer, but small amounts of concrete can also be mixed using a shovel. We do not recommend adding all of the water right at the start. Find the right plasticity by adding water during mixing. Do not add more water than the provided guidelines specify, because it reduces the strength of the concrete and increases its shrinkage. The finished concrete remains workable for around two hours.
Mixing
Refer to the bag for how much water the concrete requires. Add the dry material to the water and mix thoroughly. The mixing is usually done with a concrete mixer, but small amounts of concrete can also be mixed using a shovel. We do not recommend adding all of the water right at the start. Find the right plasticity by adding water during mixing. Do not add more water than the provided guidelines specify, because it reduces the strength of the concrete and increases its shrinkage. The finished concrete remains workable for around two hours.
Work instructions
Mould and reinforcement work is done according to the normal working methods and the instructions of the designers.
Casting work is done according to the normal working methods and the instructions of the designers. The lowest usage temperature is + 5°C.
After treatment
You must care for the fresh casting by spraying with water and by protecting it with plastic that prevents excessive evaporation of moisture. The need for aftercare depends on the conditions. It should continue for at least two days.
Waste handling
Storage and handling of waste. See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank
| Material usage |
90 kg/m2 with a 50 mm layer thickness |
| Water requirement |
2.5-3.0 l/25 kg |
| Finished compound |
12 - 13 l / 25 kg bag |
| Type |
powder |
| Colour |
grey |
| Maximum grain size |
10 mm |
| Package size |
25 kg, 500 kg and 1000 kg |
| Storage |
storage time in a dry location approx. 1 year |
| Lowest usage temperature |
+ 5°C |
| Workability time |
2 h |
| Compressive strength |
approx. 25-30 MPa |
| Fire class |
A1 |
| Frost resistance |
Frost-resistant |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.