Fescoterm plastering accessories

• Used in Fescopanel board plastering as a baseboard for plastering
• For outdoor and indoor use
• Also available as a flexible version (for curved surfaces)
• Grey colour

• Used in Fescopanel board plastering at the bottom and side edges of the board
• Length 2500 mm
• 25 pcs./box
• Colour white

• Length 2500 mm
• 10 pcs./box

Length 2500 mm. 20 pcs./box

• Used in Fescopanel board plastering at the top edge of the board
• Length 2500 mm
• 20 pcs/bundle
• Colour white

• The moulding is used as an expansion joint profile in plastering
• Profile depth 6 mm
• Length 2500 mm
• A package contains 10 pcs

• The moulding is used as an expansion joint profile in plastering for 5-25 mm wide movement joints
• Length 2500 mm
• A package contains 25 pcs

• Used in Fescopanel board plastering as a ventilation profile at the bottom of the wall

• Used for reinforcing outer corners in thin-layer plastering
• Length 2500 mm
• 15 pcs./box

• The PVC socle moulding with mesh is used as the starting strip in thin-layer plastering
• Layer thickness 5 mm
• Length 2500 mm
• A package contains 10 pcs
• Smallest delivery batch one package

• A PVC starting and edge strip
• Length 2.5 m

• Length 2500 mm
• 50 pcs./box

• 7 mm x 7 mm, width 1000 mm
• The fibreglass mesh is used in board and thin-layer plastering on wall surfaces to strengthen the plastering surface
• Can also be used with floor levelling compounds
• Alkali-protected
• One roll contains 50 m²

• Used for corner reinforcement in thin-layer plastering
• Length 2500 mm
• 50 pcs/bundle
• Smallest delivery batch one bundle

• Used for corner reinforcement in thin-layer plastering
• Angle can be freely adjusted between 0 and 180 degrees
• Length 50 lineal metres
• Smallest delivery batch one box

• Length 2600 mm
• 30 pcs./box

• Used for finishing window frames in thin-layer plastering
• The moulding is fastened to the window or door frame using the included adhesive tape. A protective plastic sheet can be easily fastened to the frame moulding with adhesive tape
• Length 2600 mm
• A package contains 30 pcs

• Used for finishing window frames in thin-layer plastering
• The moulding is fastened to the window or door frame using the included adhesive tape. A protective plastic sheet can be easily fastened to the frame moulding with adhesive tape
• Length 2600 mm
• A package contains 50 pcs

• Length 2600 mm
• 60 pcs./box

• Length 2600 mm
• 50 pcs./box

• Aluminium profile for protecting the bottom edge of the insulation in the Fescoterm thin-layer plastering system
• Package size 10 pcs/bundle
• Smallest delivery batch one bundle
• Length 2.5 m

• A mesh reinforcement attached to the front edge of the aluminium profile
• Drip moulding
• Application thickness 10 mm
• Length 2.5 m
• 15 pcs/package

• Used to connect Fescoterm aluminium profiles to each other
• Reduces the risk of cracking in insulation plastering
• A bag contains 100 pcs
• Supplied in batches of one bag

• The nylon fastener is used to fasten the Fescoterm thin-layer plastering system insulation
• Package size 100 pcs/box

• Used as a covering flange for the Fescoterm thin-layer plastering system’s inset fasteners
• Diameter 65 mm, thickness 15 mm
• 100 pcs/box

• Used as a covering flange for the inset fasteners of the Fescoterm thin-layer plastering system
• Diameter 65 mm, thickness 15 mm
• 100 pcs/box

• For straightening the socle profile and adjusting its distance from the mounting surface on uneven surfaces
• 100 pcs/box

• A fastener for fastening the insulation and mesh to the bedding in the Fescoterm thick-layer plastering insulation system
• Usage: 4-10 pcs/m²
• 100 pcs/box

• Used in thick-layer plastering to fasten the mesh to the base so that it stays clear of the base
• Material RST A2
• 500 pcs/package

• Hot-dip galvanised plaster mesh for thick-layer plastering
• Opening size 19 x 19 mm/1.0 mm

Hot-dip galvanised plaster mesh for thick-layer plastering. Opening size 19 x 19 mm/1.0 mm.