Alkali-protected fibreglass mesh for indoor and outdoor use. 7 mm x 7 mm, width 1000 mm. Alkali-protected. One roll contains 50 m2.
- for the reinforcement of the plastered surface in the thin-layer plastering of wall surfaces
- reinforcement of floor levelling compounds
Vinkki! Vieritä taulukkoa sivuttain
Fibreglass mesh 1000 mm 50 m2/rll
The base must be sufficiently sturdy and firm; remove any unevenness and cement paste before beginning meshing work.
Spread the Reinforcing Mortar evenly over the entire surface, press the fibreglass mesh into the wet mortar with a 10 cm overlap, and level the surface. During work, ensure that the mesh is fully embedded in the mortar layer. Around openings, we recommend diagonal meshing using strips cut from fibreglass mesh. In corners, use Fescon corner beads (alternatively, fold the fibreglass mesh around corners and window frames).
Storage and handling of waste. See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank
1750 / 5 cm ( DIN EN ISO 13934-1 N/5cm)
7 mm x 7 mm, width 1000 mm
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.