Floor leveling products

Floor compound LM 6000

A cement-based, casein-free semi-dry floor compound that hardens and dries rapidly, and can be manually applied. Uses: casting, straightening, filling and grading of concrete floors. Surface levelling is recommended. Largest grain size 1.2 mm. Layer thickness 10-250 mm. Dry usage: around 1.8 kg/m2/mm. Ready-to-apply compound around 10-11 l/20 kg.

Get familiar with our product

Underfloor heating filler LL 5500

A fibre-reinforced, casein-free floor underfloor heating filler with a special cement binder that hardens and dries rapidly, and can be manually applied. Use: underfloor heating filler for indoor concrete and primed plasterboard floors. Largest grain size 1.2 mm. Layer thickness 10-80 mm. Dry usage: around 1.8 kg/m2/mm.

Get familiar with our product

Coarse floor levelling compound LM 5000

A cement-based, casein-free floor levelling compound that hardens and dries rapidly, and can be manually applied. Uses: casting, straightening, filling and grading of concrete floors. Largest grain size 1.2 mm. Layer thickness 5-80 mm. Dry usage: around 1.8 kg/m2/mm.

Get familiar with our product

Floor levelling plaster LT 4000

A cement-based, casein-free floor levelling compound that is easily levelled, rapidly hardening and drying, and can be manually applied. Used to level the surface of concrete floors. Also suitable for graded floors. Largest grain size 0.6 mm. Layer thickness 3-30 mm. Dry usage: approx. 1.6 kg/m2/mm.  

Get familiar with our product

Floor concrete LB 7

Special cement based, pumpable and rapidly drying floor concrete. Suitable for casting graded floors, conduit filling and applications where the structure must be taken into use rapidly, such as pipe renovations. Compressive strength around 40 MPa Fibre-reinforced. Layer thickness 10 - 150 mm. Dry usage: around 1.8 kg/m2/mm.

Get familiar with our product

Fescorapid

A quickly hardening and drying repair plaster with a special cement binder for repairing holes in a concrete floor, correcting the floor grade, and repairing and levelling stairs. Strength approx. 30 MPa, maximum grain size 0.6 mm, and layer thickness 2-20 mm. Usage: 1.5 kg/m2/1 mm.

Get familiar with our product

FlowPlan

A cement-based, floor levelling compound that is easily levelled, rapidly hardening and drying, and has hight tensile and compressive strength. Suitable for public spaces and can be pump-applied. Layer thickness 1 - 10 mm. Dry usage: around 1.6 kg / m2 / mm.

Get familiar with our product

Flow H

A cement-based, casein-free floor levelling compound that is easily levelled, hardens and dries rapidly, and can be applied with a pump. Used for concrete floor levelling. Layer thickness 4-30 mm. Dry usage: around 1.7 kg/m2/mm.

Get familiar with our product

Flow HS

Designed for low-strength and difficult bases, Fescon Flow HS is a fibre-reinforced, low-alkali (pH < 11), casein-free, pump-applied levelling compound with a special cement binding agent, that is easy to level and features excellent workability.

Get familiar with our product

FlowBase

Fescon FlowBase is a low-alkali (pH < 11), easy-to-level, fast setting, pump-applied levelling compound with a special cement binder and with high tensile and strength properties as well as having excellent workability characteristics and strength values.

  • For layer thicknesses 2-30 mm (partial levelling max. 50 mm)
  • High strength properties
  • Easy to level
  • Can be pump-applied and manually levelled
  • For underfloor structure of coatings
Get familiar with our product

FlowFiber

Fescon FlowFiber is a fibre-reinforced, low-alkali (Ph < 11) pump-applied levelling compound with a special cement binder, which is both self-smoothing and features excellent workability characteristics.

Get familiar with our product

Flow GS 3.0 mm Gypsum floor mass

Flow GS 3.0 mm Gypsum floor mass is a pump-applied, easily levelling floor compound with a gypsum binder and having excellent workability and spreading characteristics. Suitable for heated floor structures, in particular.

Get familiar with our product

Flow Primer

Brush-on primer for surface pretreatment before floor levelling. Flow Primer improves the adhesion of floor levelling compounds, reduces or eliminates the formation of air bubbles, and prevents water contained in the floor levelling compound from being absorbed into the surface too quickly. Usage: Hollow-core slab surfaces: about 10 m2/l. Cast-in-place concrete surfaces: about 5 m2/l. Plaster and wood surfaces: about 7 m2/l. Mixing ratio: Concrete surfaces and surfaces with cement-based levelling: 1 part Flow Primer, 3 parts water. Surfaces that cannot withstand moisture, e.g. plaster and wood surfaces: Use undiluted. For indoor use.

Get familiar with our product

Fescon Primer PLUS

Brush-on special primer for the pretreatment of the base on non-absorbent surfaces (ceramic, glass or steel) before levelling.  Usage: around app. 150 g/ m2. Product is ready for use and does not need to be thinned. Pallet size (5 kg) 90 cans / pallet.  

Get familiar with our product

Elevation mark

Elevation mark with adhesive tape for floor levelling compounds. Scale 10-65 mm or 10-100 mm. Sold in bags of 100.

Get familiar with our product

Bordering strip 30x30x2000 mm

Fescon Bordering strip is a self-adhesive polyester strip for bordering floor levelling compounds.  With the Bordering strip, the pumped areas can be restricted to the required size, also suitable for making door stops. Installation on a cleaned and primed base.

Get familiar with our product

Bordering strip 8x150 mm

A bordering strip for separating floating floor structures from vertical structures. The Bordering strip has a ready-fitted overlapping plastic sheet with adhesive tape, to be installed over separation fabric or insulation.  The back of the Bordering strip has a fastening tape for wall mounting. Roll length 25 m. Sales lot 4 rolls/package (100 m).

 

Get familiar with our product

Separation fabric 1.5x50 m

Breathable Separation fabric for separating floating floor structures, if the base is of weak concrete, a floor base, or insulation. Diffusion open, separation fabric, made of polypropylene, through which the water in the floor levelling compound cannot penetrate. Both long sides of the separation fabric have an overlapping tape ready-fitted, overlapping according to alignment lines.

Get familiar with our product

Products

Enter amount

units
Add