Product description

Containing special cement binder, Fescofine is a fast-hardening and fast-drying versatile finishing plaster for floors, walls and ceiling. Suitable for both indoor and outdoor use.

  • For layer thicknesses of 0,-5 mm, maximum thickness of 10 mm in patch filling
  • Manually levelled
  • Easy to work with
  • Coatable approx. 2 h
  • Paste-like consistency
  • Makes almost no dust


  • For the quick levelling of concrete surfaces.
  • For repairing holes in concrete floors, correcting floor grading, and repairing and levelling stairs.
  • Repairs to concrete surfaces, including wall and ceiling surfaces.
Vinkki! Vieritä taulukkoa sivuttain
EAN code Product name Product number Package size
6416841202390 Fescofine 20239 20 kg


  • Concrete substrates
  • The base is clean, solid and vacuum-cleaned
  • Loose layers, cement paste, and other impurities have been mechanically removed to ensure adhesion.
  • Smooth concrete surfaces should be coarsened.
  • Sufficient strength, load-bearing capacity and immobility
  • The tensile strength of the base must be > 1.0 MPa.
  • The temperature of the underfloor structure is > +10 °C and relative humidity < 95% RH The relative humidity of the underfloor structure affects the setting of the floor levelling compound.
  • Priming is performed according to the instructions of Fescon Adhesive Primer or Flow Primer, depending on the base
  • Impermeable surfaces, such as ceramic tiles, epoxy and metal surfaces, are pre-treated according to the instructions for Fescon Primer PLUS. 
  • No primers are used in outdoor installations. To prime the surface, wet it with water roughly an hour before applying Fescofine. The surface should be matte; there must be no puddles of water on the surface.
Instructions for use
  • Working time is around 15 minutes from adding the water.


  • The floor compound can be waterproofed directly with products from the certified Fescon waterproofing system. 
  • Can be covered with ceramic tiles, plastic coatings, textile mats, vinyl tiles, wood parquet or laminate, as well as cork.
  • However, it must be ensured that the levelling compound, concerning its technical properties, meets the requirements of the manufacturer of the floor covering and RYL for bases to be covered, with the entire structure in mind. 
  • In indoor use, the finishing plaster should not be left uncoated for more than 3 months due to the risk of cracking and becoming detached. 
  • To dry properly, the finishing plaster requires a relative indoor air humidity of below 50% and temperatures above 20 °C. Poor conditions compromise the strength of the finishing plaster and prolong the drying time.




Waste handling

Hardened product and empty, dry packages can be delivered to a landfill. A liquid product must be delivered to a hazardous waste reception point.

Technical information

Material usage

1 mm layer approx. 1.5 kg/m²

Water requirement 6.0-6.5 l / 20 kg
Type powder
Binder special cement
Colour bleached gray
Maximum grain size

0.1 mm

Package size 20 kg

storage time in a dry location approx. 10 months

Fibre non-fibre reinforced

Substances improving workability. Casein-free.

Usage temperature

+ 10°C...+25°C

Workability time approx. 15 min
Coatable approx. 2 h (+20°C, RH 50 %)
Walkable approx. 2 h (+20°C, RH 50 %)
Compressive strength

> 15 MPa (28 days, +20 °C, RH 50 %)

Adhesion strength

> 1,5 MPa for concrete (7 day +20°C, RH 50 %)

Flexural bond strength F 5 (EN 13813)
Surface tensile strength > 1,5 MPa (28 days , +20°C, RH 50 %) as with Fescorapid
Frost resistance Frost resistant. Suitable for indoor and outdoor use.
pH < 11 low alkaline (hardened material).


The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.


Enter amount