Flow H
Product description
Fescon Flow H is a low-alkali (pH < 11), casein-free, pump-applied levelling compound with a special cement binding agent, that is easy to level and features excellent workability.
- Easy to level
- For layer thicknesses 4 - 30 mm
- Dries through hydration.
- Can be pump-applied
Applications
- For finishing concrete floors in flats, offices, public buildings, schools, hospitals and other such sites
- Tanker pumping is not recommended at temperatures < -25°C
The product is suitable for use on sites with a Nordic Swan Ecolabel.
Vinkki! Vieritä taulukkoa sivuttain
|
6416841202314
|
Flow H 20 KG
|
20231
|
20 kg
|
|
6416841390738
|
Flow H 1000KG
|
39073
|
1000 kg
|
|
|
Flow H
|
33122
|
1 kg
|
Base
- Clean, solid and dust-free
- Sufficient strength, load-bearing capacity and immobility
- Relative humidity < 95% RH
- Temperature > + 10 °C
- Loose layers, cement paste and other impurities must be mechanically removed
- If the adhesion strength of the base is < 0.5 MPa, the floor is constructed as a floating structure using Flow HS
Priming
- Carry out the priming in accordance with Fescon Adhesive Primer instructions, depending on the base
- The primer must be dry before levelling
Instructions for use
- Mix a bag (20 kg) of the levelling compound in 4.0-4.4 litres of cold water
- Do not use any more water, because this decreases the surface strength
- Mix the levelling compound carefully and long enough to form a consistent paste
- Apply the levelling compound with a steel trowel or pump it onto the levelled surface
- Workable for about half an hour after adding water
- Wash tools with water immediately after completing the work
- When pumping, the relative humidity in the air must be >40%
Flooring
- Can be floored using ceramic tiles, plastic or textile mats, vinyl tiles, wood parquet or cork
- The floor levelling compound (once it has dried) must not be left uncovered for longer than three months
After treatment
- Once the base has dried sufficiently for the chosen flooring, the flooring is installed or the aftercare begun
- In conditions with an RH of less than 40%, special attention should be paid to when to start the aftercare
Waste handling
Storage and handling of waste. See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank
| Material usage |
1 mm layer approx. 1.7 kg/m²
|
| Water requirement |
4.0-4.4 l/20 kg |
| Binder |
special cement |
| Colour |
grey |
| Maximum grain size |
0,6 mm |
| Package size |
20 kg, 1000 kg, bulk (kg) |
| Storage |
storage time in a dry location 12 months |
| Layer thickness |
4 - 30 mm, when pumping the minimum layer thickness is 5-10 mm, depending on the pumping equipment |
| Lowest usage temperature |
+ 10°C – +25°C |
| Workability time |
app. 0,5 h |
| Drying time |
approx. 1 day/10 mm (RH 50% + 20 °C) |
| Coatable |
approx. 1-3 weeks (RH 50% + 20 °C) |
| Walkable |
approx. 4- 6 h |
| Strength class |
C 20 (EN 13813) |
| Compressive strength |
> 20 MPa (28 days, +20 °C, RH 50 %) |
| Adhesion strength |
28 days > 1.5 MPa |
| Flexural bond strength |
F 5 (EN 13813) |
| Surface tensile strength |
> 1,2 MPa (28 days, +20 °C, RH 50 %) |
| Wear resistance |
RWFC 550 (EN 13892-7) |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.