Liquid facade paints and coatings

Protective paint

Liquid, water-soluble, alkali-resistant acrylate paint for protecting concrete surfaces against moisture and carbonisation.  Usage 0.2-0.5 l/m²/application.

Get familiar with our product

Silicone-resin primer MC

Solvent-free primer guaranteeing adhesion and even absorption for concrete, board and plaster surfaces, and paint surfaces in good condition. Primer for application before the Silicone resin coating and Fescosan coating. Usage 0.2 kg/m² (when thinned by 50%). Can be tinted. 

Get familiar with our product

Silicone resin coating MC

A liquid, water-soluble silicone resin coating that is extremely breathable and water-resistant. This durable coating is suitable for new and previously coated stone surfaces on façades.  It is also a coating product in the Fescoterm thin-layer plastering system. Usage: 2.2-4.2 kg/m² (depending on grain size). Grain sizes 1.5 and 3.0 mm also available to order. The silicone resin primer MC is used as the primer.

Get familiar with our product

Piirto silicone resin coating

A liquid, water-soluble silicone resin coating that is extremely breathable and water-resistant. This durable coating is suitable for new and previously coated stone surfaces on façades.  It is also a coating product in the Fescoterm thin-layer plastering system. Usage: 3.5 kg/m² (depending on grain size). The silicone resin primer MC is used as the primer.

Get familiar with our product

Fescosan coating

The silicone resin based Fescosan coating minimises dirt accumulation on the façade. Its homogeneous composition, optimal open time and good workability help achieve an extremely good result. The product is very water-resistant and weather-resistant and permeates water vapour. Fescosan offers good protection against algae and mould. Can be applied by rubbing and spraying. It is also a coating product in the Fescoterm thin-layer plastering system. Usage 2.2-4.2 kg/m² (depending on grain size). Also available in 1.5 and 3.0 mm grain sizes to order. The silicone resin primer MC is used as a primer.

Get familiar with our product

Deeply penetrating primer

Colourless primer for sand-releasing and weak bases. Usage around 0.2 l/m²/application. 

Get familiar with our product

Silicone resin paint

A high-quality, matte finish silicone resin paint for façades that is highly permeable to water vapour. Suitable bases include mineral plaster surfaces, durable façade surfaces, and textured plaster surfaces. Usage: 0.2 l/m²/application. 

Get familiar with our product

Silicate Primer

Colourless primer for the Silicate facade paint. Suitable for strengthening mineral bases. For evening the absorption of highly absorptive and sand-releasing surfaces. Does not contain solvents. Usage around 0.2-0.4 l/m² (thinned 2:1 with water)

Get familiar with our product

Silicate façade paint

A high-quality potassium silicate based façade paint. Effective coverage. A silicate façade paint forms an extremely weather-resistant façade coating with good water vapour permeability. Suitable bases are masonry walls, previously plastered surfaces, and durable, previously silicate-coated surfaces. Usage: around 0.18-0.25 l/m²/application.

Get familiar with our product

2-K Primer

The 2-K Primer is an epoxy-based, two-component, solvent-free primer for concrete surfaces. Used for priming new and old concrete balconies. UV-protected. Usage: 0.2-0.4 kg/m2.

Get familiar with our product

1-K Elastic

The Fescon 1-K Elastic is a matte, one-component durable polyurethane coating for indoor and outdoor use. UV-protected. Used for coating of new and old concrete balconies. Colour RAL 7038, light grey. Usage: approx. 1.6 kg/1 mm layer.

Get familiar with our product

2-K Elastic

Fescon 2-K Elastic is a glossy, two-component durable polyurethane coating for terraces and balconies. Solvent-free. UV-protected. Colour RAL 7038, light grey. Usage 2.5 kg/2 mm layer.

Get familiar with our product

Protective lacquer

The Fescon Protective Lacquer is a clear, matte polyurethane lacquer for protecting the 1-K and 2-K balcony coatings in outdoor areas. Usage 150 g/m2.

Get familiar with our product

Decorative flakes

PVA flakes are used with epoxy and polyurethane-based balcony coatings. Black-and-white in colour. Other tints available to order. Usage: around. 50 g/m2.

Get familiar with our product

Thinner

A solvent-based thinner for washing tools and thinning the 1-K and 2-K Elastic coatings and the 2-K Primer.

Get familiar with our product

Products

Enter amount

units
Add