Mortar for tongue-and-groove blocks PHL Winter

Product description

Fescon Mortar for tongue-and-grove blocks Winter is a dry mortar for the winter-time thin-jointing of lightweight aggregate blocks. The maximum grain size is 1.2 mm. Fescon Stone Adhesive is used for the thin-jointing of sand-lime bricks.

  • easy to use
  • good workability characteristics
  • frost-resistant
  • low water absorption capacity

Applications

  • for thin-joint masonry in the temperature range +5 ... -10°C.
Vinkki! Vieritä taulukkoa sivuttain
EAN code Product name Product number Package size
6416841329004 MORTAR FOR TONGUE-AND-GROOVE BLOCKS PHL WINTER 32900 500 kg
6416841330246 MORTAR FOR TONGUE-AND-GROOVE BLOCKS PHL WINTER 33024 1000 kg

Instructions

Refer to the bag for how much water the plaster requires. Add the dry material to the water and mix with a concrete
mixer for around ten minutes. With a power mixer or a drill paddle, around two to three minutes of mixing is sufficient. Let the plaster stand for around five minutes and mix it again for a short while. Find the correct consistency at this stage by gradually adding the rest of the water. We do not recommend adding all of the water right at the start. The finished plaster remains workable for around one hour.

Designed for thin-joint masonry in the temperature range -10 ... +5°C
Follow the instructions of the designers and official regulations in masonry work.
National Building Code of Finland B5 and National Building Code of Finland B8, and RYL 2000 instructions.

Waste handling

Hardened product and empty, dry packages can be delivered to a landfill. A liquid product must be delivered to a hazardous waste reception point.

Technical information

Material usage

0.5 kg/H-75; 1.5 kg/UH-100…UH-150;
2.5 kg/RUH-200…RUH-380

Water requirement 3.5-4.5 l/25 kg
Finished compound 13 - 14 l / 25 kg bag
Type powder
Colour grey
Maximum grain size

1.2 mm

Package size 500 kg and 1000 kg
Storage

storage time in a dry location approx. 1 year

Lowest usage temperature

- 10°C

Workability time 1 h
Strength class M 10
Nominal shear resistance

> 0.16 N/mm2 (avg)

Fire class A1
Heat conductivity 0.83 W/mK
Frost resistance Yes
Water vapour permeability

µ 15/35

References

Other links

The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.

Products

Enter amount

units
Add