Mortar for tongue and groove blocks PHL Winter
Product description
Fescon Mortar for tongue and grove blocks Winter is a dry mortar for the winter-time thin-jointing of lightweight aggregate blocks. The maximum grain size is 1.2 mm. Fescon Stone Adhesive is used for the thin-jointing of sand-lime bricks.
- Easy to use
- Good workability characteristics
- Frost-resistant
- Low water absorption capacity
Applications
- For thin-joint masonry in the temperature range +5 ... -15°C.
The product is suitable for use on sites with a Nordic Swan Ecolabel.
Vinkki! Vieritä taulukkoa sivuttain
|
6416841530097
|
MORTAR FOR TONGUE-AND-GROOVE BLOCKS PHL WINTER
|
53009
|
25 kg
|
|
6416841329004
|
MORTAR FOR TONGUE AND GROOVE BLOCKS PHL WINTER
|
32900
|
500 kg
|
|
6416841330246
|
MORTAR FOR TONGUE AND GROOVE BLOCKS PHL WINTER
|
33024
|
1000 kg
|
Mixing
Refer to the bag for how much water the plaster requires. Add the dry material to the water and mix with a concrete mixer for around ten minutes. With a power mixer or a drill paddle, around two to three minutes of mixing is sufficient. Let the plaster stand for around five minutes and mix it again for a short while. Find the correct consistency at this stage by gradually adding the rest of the water. We do not recommend adding all of the water right at the start. The finished plaster remains workable for around one hour.
Work instructions
Designed for thin-joint masonry in the temperature range -15 ... +5°C
Follow the instructions of the designers and official regulations in masonry work.
National Building Code of Finland B5 and National Building Code of Finland B8, and RYL 2000 instructions.
Waste handling
Storage and handling of waste. See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank
| Material usage |
0.5 kg/H-75; 1.5 kg/UH-100…UH-150;
2.5 kg/RUH-200…RUH-380 |
| Water requirement |
3.5-4.5 l/25 kg |
| Finished compound |
13 - 14 l / 25 kg bag |
| Type |
powder |
| Colour |
grey |
| Maximum grain size |
1.2 mm |
| Package size |
25 kg, 500 kg and 1000 kg |
| Storage |
storage time in a dry location approx. 1 year |
| Lowest usage temperature |
- 15°C |
| Workability time |
1 h |
| Strength class |
M 10 |
| Nominal shear resistance |
> 0.16 N/mm2 (avg) |
| Fire class |
A1 |
| Heat conductivity |
0.83 W/mK |
| Frost resistance |
Yes |
| Water vapour permeability |
µ 15/35 |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.