Compact mortar Heavy
Product description
Fescon Compact Mortar Heavy is a cement-based mortar for burnt and sand-lime brick masonry in facades located on the coast of a body of water or subjected to strong slanted rain, or when particular protection against weather stress is required of the structure. Contains additives that improve weather resistance, workability and tightness. Maximum grain size 1.2 mm.
- easy to use
- reduces the water permeability of the shell
- good workability characteristics
- available in 9 standard colours
- low capillary water penetration
- additional colours available to order
- frost-resistant
Applications
- facade masonry in locations with harsh conditions, subjected to heavy slanted rain
Vinkki! Vieritä taulukkoa sivuttain
|
|
COMPACT MORTAR HEAVY 42 TIILENPUNAINEN
|
34505
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 52 PELLAVANVAALEA
|
34509
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 46 TURPEENRUSKEA
|
34507
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 45 MULLANRUSKEA
|
34506
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 40 KALKINHARMAA
|
34503
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 48 MUSTANHARMAA
|
34508
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 39 KVARTSINVALKOINEN
|
34501
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 41 VILJANKELTAINEN
|
34504
|
1000 kg
|
|
|
COMPACT MORTAR HEAVY 59 TUOHENVALKOINEN
|
34502
|
1000 kg
|
|
6416841344601
|
COMPACT MORTAR HEAVY M 100/600
|
34460
|
1000 kg
|
Refer to the bag for how much water the plaster requires. Add the dry material to the water and mix with a concrete mixer for around ten minutes. With a power mixer or a drill paddle, around two to three minutes of mixing is sufficient. Allow the plaster to stand for around ten minutes and mix it again for a short while. Find the correct consistency at this stage by gradually adding the rest of the water. We do not recommend adding all of the water right at the start. The finished plaster remains workable for around three hours.
The lowest working temperature is +5°C. The temperature of the stones must be above 0°C. Follow the instructions of the designers and official regulations in masonry work. National Building Code of Finland B8, Brick Structures, RYL 2000 and SFS manual 176. In facades subject to slanted rain, particular attention must be paid to masonry work and joint details. The brick should be at least 120 mm wide. Lay the bricks with full joints that are compacted during the masonry work. Ensure the tightness of the joints by applying mortar to the end of the brick before placing it. The connecting joints must be designed so that water that has penetrated the shell can exit the structure without damaging it.
Waste handling
Hardened product and empty, dry packages can be delivered to a landfill. A liquid product must be delivered to a hazardous waste reception point.
| Water requirement |
3.7-4.2 l/25 kg |
| Type |
powder |
| Colour |
standard and to-order colours |
| Maximum grain size |
1.2 mm |
| Package size |
1000 kg |
| Storage |
storage time in a dry location approx. 1 year |
| Lowest usage temperature |
+ 5°C |
| Workability time |
3 h |
| Compressive strength |
M 5 |
| Nominal shear resistance |
> 0.16 N/mm2 (avg) |
| Fire class |
A1 |
| Chloride content |
< 0,01 % |
| Frost resistance |
Yes |
| Water absorption by capillarity |
0.02 kg / (m2 *√min) |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.