Mineral coatings and thin plaster

Facade coating JSP 0.5

  • A polymer-modified coating with cement binder for brick and concrete surfaces
  • Suitable for spray and manual application
  • Maximum grain size 0.5 mm
  • Smallest manufacturing batch 100 kg/tint
Get familiar with our product

Facade coating JSP 1.5

  • A polymer-modified coating with cement binder for brick and concrete surfaces
  • Suitable for spray and manual application
  • Maximum grain size 1.5 mm
  • Smallest manufacturing batch 100 kg/tint
Get familiar with our product

Lime-cement coating KSP

  • A coloured, polymer-modified lime-cement coating that can be spray-applied
  • Suitable for coating lime-cement plaster and brick surfaces
  • Maximum grain size 1.5 mm
  • Smallest manufacturing batch 200 kg/tint
Get familiar with our product

Lime-cement coating JL

  • Coloured lime cement finishing plaster
  • Sprayable
  • Maximum grain size 1.5 mm or 3.0 mm
  • Minimum manufacturing batch 1.5 mm 200 kg/tint and 3 mm 500 kg/tint
Get familiar with our product

Thin-layer compo plaster KRL

  • Coloured lime-cement plaster for the thin-layer plastering of brick surfaces
  • Suitable for both spray and manual application
  • Largest grain size 1.5 mm
  • Smallest manufacturing batch 500 kg/tint
Get familiar with our product

Antique plaster AL

  • Cement-based, polymer-modified finishing plaster for brick, block and concrete surfaces
  • For outdoor and indoor use
  • Maximum grain size 0.5 mm or 1.5 mm
  • Colour white
Get familiar with our product

Socle and adjusting plaster SOL

  • Lime cement-based, polymer-modified fibre-reinforced plaster
  • For the levelling and two-layer plastering of lightweight aggregate block foundation walls and walls, and concrete surfaces
  • For outdoor and indoor use
  • Maximum grain size 0.6 mm
Get familiar with our product

Fibre plaster FL

  • Polymer-modified plaster with cement binder and added plastic fibres
  • For the plastering of lightweight aggregate and concrete block surfaces, and lighweight concrete and brick surfaces
  • Maximum grain size 0.6 mm
Get familiar with our product

Levelling plaster TSL

  • A polymer-modified, cement-based plaster
  • Levelling plaster for the surface of thickly plastered prefabricated element
  • Maximum grain size 0.6 m
Get familiar with our product

Adhesive mortar FLL

  • A polymer-modified plaster with cement binder
  • For the fastening of Fescoterm thin-layer plastering insulation
  • Maximum grain size 0.6 mm
Get familiar with our product

Adhesive mortar FLL Winter

  • A polymer-modified plaster with cement binder
  • For the fastening of Fescoterm thin-layer plastering insulation in the temperature range +5°C...-10°C
  • Maximum grain size 0.6 mm
Get familiar with our product

Reinforcing mortar FVL

  • A cement-based, polymer-modified, fibre-reinforced plaster
  • The mesh plaster for Fescoterm thin-layer plastering
  • Largest grain size 0.6 mm
Get familiar with our product

Products

Enter amount

units
Add