Products for infrastructure construction and the repair of concrete surfaces

• Pumpable special plaster with cement binder for bolting during quarrying. 
• Grouting of the anchor bolts used in tunnel excavation.
• Largest grain size 0,6 mm
• Strength class C 35/45

• Pumpable special plaster with cement binder for bolting during quarrying. 
• Grouting of the anchor bolts used in tunnel excavation.
• Largest grain size 0,6 mm
• Strength class C 30/37
• Working temperature +5°C – -10°C

• Special concrete for demanding casting applications with salt and frost stress
• Largest grain size 10 mm
• Strength class C 35/45
• SILKO-approved

• Rapidly hardening special plaster for demanding applications
• Largest grain size 3mm
• Strength class C 35/45
• SILKO-approved

• Improves the process of injecting cement paste into rock fissures 
• Speeds up the setting and hardening of the injected cement

• Adhesive plaster for repair plasters used in concrete structure repair work
• The maximum grain size is 0.6 mm
• Adhesion strength > 1.5 MPa

A cement-based, polymer-modified fibre plaster for the repair of deep pits and corners in concrete structures. Largest grain size 1.2 mm.

A cement-based, polymer-modified repairing plaster for the repair of damage, pits and casting defects in concrete structures, and the coating of walls, floors, stairs, plinths, and other such concrete surfaces. Largest grain size 1.2 mm or 3.0 mm. Estimated usage: 1 mm layer 1.8 kg/m².

A cement-based, polymer-modified repairing plaster for the repair of damage, pits and casting defects in concrete structures, and the coating of walls, floors, stairs, plinths, and other such concrete surfaces. Largest grain size 1.2 mm or 3.0 mm. Estimated usage: 1 mm layer 1.8 kg/m².

A polymer-modified repair plaster with cement binder for grading corrections of balconies and the repairs and patching of concrete structures. Maximum grain size 1.2 mm. Compressive strength around 40 MPa. Estimated usage: 1 mm layer 1.6 kg/m².

A polymer-modified plaster with cement binder for the levelling and thin-layer plastering of lightweight aggregate and concrete block structures and concrete surfaces. Maximum grain size 0.6 mm. Levelling work 5-10 kg/m² (depending on how even the wall is). Thin-layer plastering 6-8 kg/m² / 2 layer applications.

Fescon Corro Shotcrete RKB is a multi-purpose, strength-rated, non-sag and fibre-reinforced special concrete. It can be used for the repair and coating of concrete structures on floors, walls and ceilings. Suitable for indoor and outdoor use. It is also suitable for use as cast concrete and sprayed concrete in applications where high strength and good weather-resistance are required. Maximum grain size 3.0 mm. Strength class C30/37. SILKO approved. Material usage approx. 2.0 kg/m²/1 mm. Good adhesive properties (adhesive class R3).

A polymer-modified, fibre-reinforced levelling and protective plaster for concrete structures. SILKO-approved.

A polymer-modified, fibre-reinforced repair plaster for concrete structures. SILKO-approved.

A polymer-modified, fibre-reinforced repair plaster for concrete structures. SILKO-approved.

A polymer-modified, fibre-reinforced special concrete for shotcreting using the dry spray method. SILKO-approved.