Products for the repair of concrete surfaces and infrastructure construction

Bolting plaster SR

  • Pumpable special plaster with cement binder for bolting during quarrying. 
  • Grouting of the anchor bolts used in tunnel excavation.
  • Largest grain size 0.6 mm
  • Strength class C 35/45

 

Get familiar with our product

Winterbolting plaster SR

  • Pumpable special plaster with cement binder for bolting during quarrying. 
  • Grouting of the anchor bolts used in tunnel excavation.
  • Largest grain size 0.6 mm
  • Strength class C 30/37
  • Working temperature +5°C – -10°C

 

Get familiar with our product

SILKO Corro SKC C35/45

  • Special concrete for demanding casting applications with salt and frost stress
  • Largest grain size 10 mm
  • Strength class C 35/45
  • SILKO-approved
Get familiar with our product

SILKO Rapid Corro SPC C35/45

  • Rapidly hardening special plaster for demanding applications
  • Largest grain size 3 mm
  • Strength class C 35/45
  • SILKO-approved
Get familiar with our product

Quick Drill 45

  • Improves the process of injecting cement paste into rock fissures 
  • Speeds up the setting and hardening of the injected cement
Get familiar with our product

Adhesive plaster TL

  • Adhesive plaster for repair plasters used in concrete structure repair work
  • The maximum grain size is 0.6 mm
  • Adhesion strength > 1.5 MPa
Get familiar with our product

Non-run filling plaster VTL

  • Repair of deep holes in concrete structures both indoors and outdoors
  • Repairs where the plaster needs to be non-sagging
  • Largest grain size 1.2 mm
Get familiar with our product

Repairing plaster KL 1.2

  • Repairing plaster for the repair of damage, pits and casting defects in concrete structures, and the coating of walls, floors, stairs, plinths, and other such concrete surfaces
  • Adhesion strength R3
  • Largest grain size 1.2 mm
Get familiar with our product

Repairing plaster KL 40

  • For grading corrections of balconies and the repairs and patching of concrete structures
  • Adhesion strength R3
  • Largest grain size 1.2 mm
Get familiar with our product

Overlevelling plaster YTL

  • For the levelling and thin-layer plastering of lightweight aggregate and concrete block structures and concrete surfaces
  • Finishing of repairs of concrete structures both indoors and outdoors
  • Layer thickness 1 - 3 mm
  • Largest grain size 1.2 mm
Get familiar with our product

Repair concrete RKB

  • Multi-purpose, strength-rated, non-sag and fibre-reinforced special concrete
  • Can be used for the repair and coating of concrete structures on floors, walls and ceilings
  • Suitable for indoor and outdoor use.
  • Strength class C30/37
  • SILKO approved
Get familiar with our product

Korrogard R 0.6 mm

  • A polymer-modified, fibre-reinforced levelling and protective plaster for concrete structures
  • For both horizontal and vertical surfaces
  • SILKO-approved
  • Adhesion strength R3
Get familiar with our product

Korrogard R 1.2 mm

  • A polymer-modified, fibre-reinforced repair plaster for concrete structures
  • For both horizontal and vertical surfaces
  • SILKO-approved
  • Adhesion strength R3
Get familiar with our product

Korrogard R 3.0 mm

  • A polymer-modified, fibre-reinforced repair plaster for concrete structures
  • For both horizontal and vertical surfaces
  • SILKO-approved
  • Adhesion strength R3
Get familiar with our product

Korroshot D KSD 5.0 mm

  • A polymer-modified, fibre-reinforced special concrete for shotcreting using the dry spray method
  • SILKO-approved
  • Adhesion strength R3
Get familiar with our product

Products

Enter amount

units
Add