Tiling plaster and waterproofing products

Roller-applied, fibre-reinforced waterproofing compound for indoor applications. Suitable for waterproofing floors and walls. Usage: around 0.7 l/m². Certified VTT-C-870--06, ETA-approved, CE marking. Pallet size (12 l) 52 cans/pallet.

One-component rapidly drying roller and spray applied waterproofing compound for indoors. Suitable for waterproofing floors and walls. Usage: around 0.7 l/m². ETA-approved, CE-marked and M1-approved. Pallet size (15 l) 24 cans/pallet.

Fescoseal A+B is very flexible, rapidly drying, two-component waterproofing compound.

Suitable for both indoor and outdoor use.

Brush-on primer for surface pretreatment before floor levelling or waterproofing.  Usage: solid surfaces around 10 m² / l, porous surfaces around 6 m² / l. Mixing ratio: concrete and cement based levelling compounds: One part of primer and three parts of water, plasterboard: use undiluted. Pallet size (10 l) 50 cans/pallet.    

Brush-on primer for the pretreatment of the base in the Fescoseal A+B waterproofing system.  Usage: solid surfaces around 10 m²/l, porous surfaces around 6 m2/l. Mixing ratio: concrete and cement based levelling compounds: One part of primer and three parts of water, plasterboard: use undiluted.     

A waterproofing strip made from non-woven fabric, part of the Fescon Waterproofing System. 10 rolls/box. Not for Fescoseal waterproofing system.
Also available in a waterproofing membrane of 1.0 m x 10.0 m 10 m²/rll. Not for Fescoseal waterproofing system.

Ready-to-install lead-through and floor drain connector.

Ready-to-install flexible lead-through and floor drain connector.

Waterproofing accessories includes in all Fescon waterproofing systems. Waterproofing accessories, waterproofing strip, inner and outer corners used in waterproofing, as well as lead-through flanges.

Waterproofing accessories, waterproofing strip, inner and outer corners used in waterproofing, as well as lead-through flanges. Used in Fescoseal and Fescon WS waterproofing systems.

A non-sag, flexible adhesive plaster for fastening ceramic and clinker tiles to concrete, tile, plastic and painted bases. For outdoor and indoor use. Usage: 2-3 kg/m². The properties of the plaster meet the C2, S1 and T requirements.

Adhesive plaster particularly designed for large floor tiles on concrete, plastic and painted bases. Enables full plaster adhesion of a large tile. Suitable for both indoor and outdoor use. Usage: 3-6 kg/m². The properties of the plaster meet the C2 and S1 requirements.

Fastening for flexible or otherwise moving bases, such as sheet-metal walls, and for fastening natural stones. Usage: 2-3 kg/m². The properties of the plaster meet the C2 and S2 requirements.

Fescon Tile adhesive plaster SSL Lite is a light-coloured, non-sag, lightweight, M1-rated adhesive plaster with cement binder. Enables tiling without strips or other spacers; see research report VTT-S-05228-16. A frost-resistant adhesive plaster; see test report VTT-S-05228-16. Suitable for indoor and outdoor use.

A cement-based tile grout.

One-component silicone mass for expansion joints and sealing.