Fescon Primer KP
Product description
Fescon Primer KP is a water-soluble, synthetic rubber latex. Used as an adhesion promoting primer in the Fescoseal A+B waterproofing system. For indoor use.
Applications
- Concrete and cement based levelling compounds, plasterboard, floors with old adhesive residue and other such substances reducing adhesion.
The product is suitable for use on sites with a Nordic Swan Ecolabel.
Vinkki! Vieritä taulukkoa sivuttain
|
6416841769046
|
FESCON PRIMER KP
|
76904
|
5 l
|
|
6416841769015
|
FESCON PRIMER KP
|
76901
|
10 l
|
Pretreatment of the base
- Remove dirt, dust, cement paste and all loose material from the base.
Mixture
- Concrete and cement-based levelling compounds: 1 part of primer and 3 parts of water
- Bases that do not tolerate moisture, such as plaster of Paris, wood, chipboard and plasterboard: do not thin
Applying the primer
- The well-mixed primer is applied as a thin, even layer by brushing (avoid puddles).
- The primer must have dried before further work; its drying time is 1-4 hours depending on the conditions.
- Wash tools and equipment with water immediately.
- Very absorbent bases (e.g. concrete floors cast on-site) require two applications
Waste handling
Storage and handling of waste. See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank
| Material usage |
solid surfaces: approx. 10 m2/l
porous surfaces: approx. 6 m2/l |
| Package size |
5 l and 10 l |
| Storage |
1 year in a warm location |
| Density |
1 l = 1 kg |
| Lowest usage temperature |
+ 10°C |
| Drying time |
1-4 h depending on the conditions |
| Thinner |
water |
| Method of application |
brushing |
| Transport |
Warm transport |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.