FescoBlaster FBL mortar pump
Product description
Hand-held mortar pump for applying plaster and concrete to seams and for fixing holes in concrete and stone structures, for example. A very high-quality, professionally designed mortar pump that allows you to easily apply different pastes into difficult places. Easy and simple to use: Pull the trigger to fill the pump’s container, and then fill the hole by pushing the paste out of the pump.
- Designed for demanding professional use
- Lightweight but robust
- Maximum paste grain size up to 4 mm
- The mortar pump is available with four different nozzles.
- Significant savings in working hours
4 different nozzle sizes:
- FBL 1 mortar pump, nozzle 18 mm rectangle
- FBL 2 mortar pump, nozzle 24 mm round, bent
- FBL 3 mortar pump, nozzle 18 mm rectangle, bent
- FBL 4 mortar pump, nozzle 10 mm rectangle
Applications
- Seam fills
- Seaming for stone structures
- Fixing holes in elements
- Fixing holes in concrete and stone structures
Vinkki! Vieritä taulukkoa sivuttain
|
6416841100009
|
FescoBlaster FBL 1 Mortar pump, nozzle 18 mm rectangle
|
10000
|
1 pcs
|
|
6416841100016
|
FescoBlaster FBL 2 Mortar pump, nozzle 24 mm round, bent
|
10001
|
1 pcs
|
|
6416841100023
|
FescoBlaster FBL 3 Mortar pump, nozzle 18 mm rectangle, bent
|
10002
|
1 pcs
|
|
6416841100030
|
FescoBlaster FBL 4 Mortar pump, nozzle 10 mm rectangle
|
10003
|
1 pcs
|
|
6416841100108
|
FescoBlaster FBL piston, spare part
|
10010
|
1 pcs
|
|
6416841100115
|
FescoBlaster FBL pump cover, spare part
|
10011
|
1 pcs
|
Mix the paste to be used until smooth and pre-treat the bases according to the paste’s instructions. Insert the mortar pump’s nozzle into the paste and fill it by pulling the trigger. Position the mortar pump nozzle into the target to be sprayed and push the paste out by pulling the trigger. Finish the paste surface as needed.
Wash the mortar pump thoroughly with water immediately after use.
Cure the paste used according to its instructions.
Wear the personal protective equipment required for the work, such as a respirator, protective gloves and goggles, etc.
Waste handling
Hardened product and empty, dry packages can be delivered to a landfill. A liquid product must be delivered to a hazardous waste reception point.
| Maximum grain size |
The maximum grain size for the paste used is 4 mm. |
| Package size |
pcs |
| Lowest usage temperature |
Lowest recommended working temperature + 5 °C. |
| Weight |
0.88–1.10 kg depending on model. |
The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.