Bedding plaster LF

Product description

Fescon Bedding Plaster LF is a polymer-based bedding plaster for interior walls.


  • Wall and ceiling surfaces in dry spaces
  • Suitable for rock material bases and board surfaces
  • The levelling compound cannot be used for floor levelling or as a base for tiling
The product is listed in the portal for building products that can be used in Nordic Swan Ecolabelled buildings.

Vinkki! Vieritä taulukkoa sivuttain
EAN code Product name Product number Package size
6416841201010 BEDDING PLASTER LF 20101 20 kg



Refer to the package for how much water the levelling compound requires. Add the dry material to the water and mix with a drill paddle for around one to two minutes. Let the levelling compound stand for at least fifteen minutes and mix it again for a short while. The finished levelling compound remains workable for around one day. The adhesion and wear resistance of the levelling compound can be improved by replacing 10% of the water with Fescon Primer.

Work instructions

The base must be solid, clean and dust-free, and all substances decreasing adhesion must be removed. Spread the levelling compound on the base either with a levelling spray or a steel trowel. You can recover and reuse any extra compound. When applying several layers of the levelling compound, allow the previous layer to harden completely before applying the next layer. Depending on the conditions, the hardening will take one to two days. If necessary, the dried surface is ground after the application of each layer of levelling compound. The levelled surface can be treated with Finishing Plaster LRF, papered or painted.

Other considerations

Do not leave the levelling compound in the pumps and hoses for longer than a day. Excess moisture of the structure may cause yellowing of the putty.

Waste handling

Storage and handling of waste. See the separate storage and disposal instructions

Technical information

Material usage

1 mm layer aprox. 1.2 kg/m² (full levelling max. 1-3 mm/application)

Water requirement 4.8-5.6 l/20 kg
Type powder
Binder polymer adhesive
Colour whitish
Maximum grain size

0.6 mm

Package size 20 kg

storage time in a dry location approx. 1 year

Layer thickness

1 - 5 mm

Lowest usage temperature

+ 10°C

Workability time 1 day
Coatability painting and papering
Hardening time

approx. 1 day at + 20°C, approx. 2 days at + 10°C
drying time depends on layer thickness and the humidity in the drying area

Adhesion strength

> 0.5 MPa (for a concrete surface)

Fire class A2
Exposure class RL 01 - RL 03 ( RL 04 with addition of primer)

The information is based on tests and practical experience. We cannot affect conditions at the work site so we cannot assume responsibility for the end result affected by local conditions.


Enter amount