Repair concrete RKB

  • For filling, hole filling and other repair of concrete structures
  • For wall, ceiling and floor surfaces, indoor and outdoor use
  • Strength class C30/37
  • SILKO and M1 approved

Overlevelling plaster YTL

  • For the levelling and thin-layer plastering of lightweight aggregate and concrete block structures and concrete surfaces
  • Finishing of repairs of concrete structures both indoors and outdoors
  • Layer thickness 1 - 3 mm
  • Largest grain size 1.2 mm

Fescorapid

  • A quickly hardening and drying repair plaster with a special cement binder
  • For repairing holes in a concrete floor, correcting the floor grade, and repairing and levelling stairs.
  • Suitable for indoor and outdoor use
  • Layer thickness 2 - 20 mm
  • Maximum grain size 0.6 mm

Fescofine

  • Fescofine is a fast hardening and drying finishing compound with a special cement adhesive agent for concrete surfaces
  • For repairing holes in concrete floors, correcting floor grading, and repairing and levelling stairs
  • Suitable for indoor and outdoor use
  • Layer thickness 0 - 5 mm
  • Maximum grain size 0.1 mm

Bolting plaster SR

  • Pumpable special plaster with cement binder for bolting during quarrying. 
  • Grouting of the anchor bolts used in tunnel excavation.
  • Largest grain size 0.6 mm
  • Strength class C 35/45

 

Winterbolting plaster SR

  • Pumpable special plaster with cement binder for bolting during quarrying. 
  • Grouting of the anchor bolts used in tunnel excavation.
  • Largest grain size 0.6 mm
  • Strength class C 30/37
  • Working temperature -10°C...+5°C

Rock paint FRP Cave paint

  • For spray painting shotcrete and concrete surfaces
  • Material usage approx 0,5 – 0,8 kg/m2
  • The maximum grain size is 0.1 mm
  • Finished surface with one application

SILKO Corro SKC C35/45

  • Special concrete for demanding casting applications with salt and frost stress
  • Largest grain size 10 mm
  • Strength class C 35/45
  • SILKO-approved

SILKO Rapid Corro SPC C35/45

  • Rapidly hardening special plaster for demanding applications
  • Largest grain size 3 mm
  • Strength class C 35/45
  • SILKO-approved

Adhesive plaster TL

  • Adhesive plaster for repair plasters used in concrete structure repair work
  • The maximum grain size is 0.6 mm
  • Adhesion strength > 1.5 MPa

Korrogard R 0.6 mm

  • A polymer-modified, fibre-reinforced levelling and protective plaster for concrete structures
  • For both horizontal and vertical surfaces
  • SILKO-approved
  • Adhesion strength R3

Korrogard R 1.2 mm

  • A polymer-modified, fibre-reinforced repair plaster for concrete structures
  • For both horizontal and vertical surfaces
  • SILKO-approved
  • Adhesion strength R3

Korrogard R 3.0 mm

  • A polymer-modified, fibre-reinforced repair plaster for concrete structures
  • For both horizontal and vertical surfaces
  • SILKO-approved
  • Adhesion strength R3

Korroshot D KSD 5.0 mm

  • A polymer-modified, fibre-reinforced special concrete for shotcreting using the dry spray method
  • SILKO-approved
  • Adhesion strength R3

Quick Drill 45

  • Improves the process of injecting cement paste into rock fissures 
  • Speeds up the setting and hardening of the injected cement