Floor leveling products | Products | Fescon

Fast-setting and fast-drying, manually applied, cement-based floor mortar to be spread in earth-moist consistency
For casting, filling, leveling, and sloping of concrete floors in indoor applications
Layer thickness 10 - 250 mm
Maximum grain size 1.2 mm

Lisätiedot

Manually applied, fast-drying and fast-setting, fibre-reinforced cement-based floor screed
Suitable as an underfloor heating screed for dry and wet indoor areas
Layer thickness 10 - 80 mm
Maximum grain size 1.2 mm

Lisätiedot

Fast-setting and fast-drying cement-based floor screed
For levelling, filling, correcting, and sloping concrete floors in indoor applications
Layer thickness 5 - 80 mm
Maximum grain size 1.2 mm

Lisätiedot

Easy-to-level, fast-setting and fast-drying cement-based floor screed
For levelling and correcting concrete floors in indoor applications
Layer thickness 3 - 30 mm
Maximum grain size 0.6 mm

Lisätiedot

Pumpable, special cement-based floor concrete with very fast drying properties for indoor use
For casting, filling, surface correction, and sloping of concrete floors in indoor applications (dry and wet areas)
Layer thickness 30 - 150 mm
Maximum grain size 3.0 mm

Lisätiedot

A quickly hardening and drying repair plaster with a special cement binder
For repairing holes in a concrete floor, correcting the floor grade, and repairing and levelling stairs
Suitable for indoor and outdoor use
Layer thickness 2 - 20 mm
Maximum grain size 0.6 mm

Lisätiedot

Special cement-based, fast-setting and fast-drying, versatile finishing compound
For floor, wall, and ceiling surfaces
Suitable for indoor and outdoor use
Layer thickness 0 - 5 mm
Maximum grain size 0.1 mm

Lisätiedot

For final leveling of concrete floors and cement-based floor screeds
Suitable as a base for polyurethane and epoxy coatings with a layer thickness of more than 3 mm
As a base for adhesive surface materials
C 30, for layer thickness 1 - 15 mm (partial levelling max. 20 mm)

Lisätiedot

Especially for polyurethane and epoxy coatings
Suitable as a base for mats and for alkali protection
C 30, non-fibre reinforced
Layer thickness 2 - 30 mm (partial levelling max. 50 mm)

Lisätiedot

Floor levelling for public and residential buildings
For surface castings of heated floors and floating floor systems
For leveling cavity slabs and concrete floors
Layer thickness 4 - 50 mm (partial levelling max. 80 mm)

Lisätiedot

Gypsum-based, pumpable, easy-to-level floor compound
Excellent workability and flow characteristics
For thermal and acoustic floor structures, as well as floating floor systems
Layer thickness 20 - 80 mm
Maximum grain size 3.0 mm

Lisätiedot

Brush-on primer for surface pretreatment before floor levelling
Improves the adhesion of floor levelling compounds, reduces or eliminates the formation of air bubbles, and prevents water contained in the floor levelling compound from being absorbed into the surface too quickly
For indoor use.

Lisätiedot

Brush-on special primer for the pretreatment of the base on non-absorbent surfaces before levelling
Product is ready for use and does not need to be thinned
For indoor use

Lisätiedot

Elevation mark with adhesive tape for floor levelling compounds
Scale 10-65 mm or 10-100 mm

Lisätiedot

Self-adhesive polyester strip for bordering floor levelling compounds
With the Edge strip, the pumped areas can be restricted to the required size, also suitable for making door stops
Installation on a cleaned and primed base

Lisätiedot

A bordering strip for separating floating floor structures from vertical structures
The back of the Bordering strip has a fastening tape for wall mounting.
Roll length 25 m

Lisätiedot

Breathable Separation fabric for separating floating floor structures, if the base is of weak concrete, a floor base, or insulation
Diffusion open, separation fabric, made of polypropylene, through which the water in the floor levelling compound cannot penetrate

Lisätiedot

Näytä tuoteryhmät