Ota yhteyttä
020 789 5900 tai Lomakkeella
Tarjouspyyntö 0

Joint filler SF

  • A polymer-based putty and jointing product for interior walls
  • Joint Filler is suitable for levelling painted base surfaces and jointing gypsum boards
  • Wall and ceiling surfaces in dry spaces
  • Maximum grain size 0.1 mm
Lisätiedot

Bedding plaster LF

  • A polymer-based bedding plaster for interior walls
  • Wall and ceiling surfaces in dry spaces
  • Layer thickness 1 - 5 mm
  • Maximum grain size 0.6 mm
Lisätiedot

Bedding plaster LF RD

  • A polymer-based low-dust bedding plaster
  • Wall and ceiling surfaces in dry spaces
  • Layer thickness 1 - 5 mm
  • Maximum grain size 0.6 mm
Lisätiedot

Finishing plaster LRF

  • A polymer-based finishing plaster
  • Wall and ceiling surfaces in dry spaces
  • Layer thickness 0 - 3 mm
  • Maximum grain size 0.3 mm
Lisätiedot

Finishing plaster LRF RD

  • A polymer-based, low-dust finishing plaster 
  • Wall and ceiling surfaces in dry spaces
  • Layer thickness 0 - 3 mm
  • Maximum grain size 0.3 mm
Lisätiedot

Brick bedding plaster TTF

  • A cement-based levelling compound for interior walls
  • Wall and ceiling surfaces in both dry and wet areas
  • Layer thickness 2 - 10 mm
  • Maximum grain size 0.6 mm
Lisätiedot

Bedding plaster VF

  • A cement-based bedding plaster for interior walls
  • Wall and ceiling surfaces in both dry and wet areas
  • Layer thickness 1 - 5 mm
  • Maximum grain size 0.6 mm
Lisätiedot

Finishing plaster VHF

  • A cement-based levelling compound for interior walls
  • Wall and ceiling surfaces in both dry and wet areas
  • Layer thickness 0 - 3 mm
  • Maximum grain size 0.3 mm
Lisätiedot

Levelling compound for wet areas WTT

  • A cement-based wall finishing plaster for wet areas, particularly under moisture insulation
  • Wall and ceiling surfaces in both dry and wet areas
  • Layer thickness 2 - 10 mm
  • Maximum grain size 0.5 mm

    

Lisätiedot

Filling plaster TLR

  • A quickly hardening and drying filling plaster with a special cement binder for interior wall surfaces
  • Wall and ceiling surfaces in dry, humid and wet areas
  • Layer thickness: Partial levelling 5 - 50 mm, overlaying 5 - 30 mm
  • Maximum grain size 1.2 mm
Lisätiedot

Indoor lime-cement plaster SR 7

  • Straightening walls and ceilings and filling chases in dry, damp and wet areas
  • Sprayable and manually applied
  • Maximum grain size 1.2 mm. Layer thickness: 5 - 30 mm, partial levelling max. 50 mm
  • Can be waterproofed in 2–4 days (layer thickness less than 20 mm)

 

Lisätiedot

Gypsum plaster mix GL

  • Pumpable, lightweight, non-shrinking gypsum levelling compound, which is also suitable for shaping manually
  • For filling, adjusting, and levelling of holes and rough areas on wall and ceiling surfaces in dry indoor spaces
  • Layer thickness 10 - 40 mm
  • Maximum grain size 0.6 mm
Lisätiedot

Wall surface strengthening membrane

  • Surface reinforcement fabric for reinforcing screed surfaces of walls
  • Strengthening the surface screed layers of block and brick walls indoors and preventing cracking
  • Roll size 1.0 m x 50 m
Lisätiedot