Silicate board SKL

Kysy lisätietoa

Tuotekuvaus

Non-combustible, fibre-free and mineral-based thermal insulation board made from natural materials for interior insulation.

  • Excellent thermal insulation properties
  • Easy to work with
  • Capillary active
  • Vapour-permeable
  • Ecological manufacturing process

Käyttökohteet

  • Interior thermal insulation of mineral-based exterior walls, e.g. earth-contact walls, concrete, lightweight concrete (Siporex) and block walls, as well as solid brick façades
  • Interior thermal insulation of mineral-based ceiling surfaces (e.g. brick vaults)
GTIN-koodi Tuotenimi Tuotenumero Pakkauskoko
SILIKAATTILEVY SKL 60 x 39 x 5 CM 72101 pkt
SILIKAATTILEVY SKL 60 x 39 x 10 CM 72102 pkt
SILIKAATTILEVY SKL 60 x 39 x 6 CM 72103 lava
SILIKAATTILEVY SKL 60 x 39 x 8 CM 72104 lava
SILIKAATTILEVY SKL 60 x 39 x 12 CM 72105 lava
SILIKAATTILEVY SKL 60 x 39 x 14 CM 72106 lava
SILIKAATTILEVY SKL 60 x 39 x 16 CM 72107 lava
SILIKAATTILEVY SKL 60 x 39 x 18 CM 72111 lava
SILIKAATTILEVY SKL 60 x 39 x 20 CM 72112 lava

Substrate

The mineral substrate must be even, clean, load-bearing and suitable for bonding the boards. Old paint, salts, bitumen coatings, etc. must be removed. If necessary, the substrate can be pretreated with Fescon Silicate primer to equalise absorption. The substrate must be moistened (to a matte-damp condition) before installing the boards. Any damage or water leaks in the substrate must be repaired before the installation of the silicate boards.

Board handling and installation

The Fescon Silicate Board SKL can be cut with a handsaw and shaped using standard woodworking tools. Before installation, any unevenness in the substrate must be levelled with a suitable mortar, such as Fescon Socle and adjusting plaster SOL, Indoor lime-cement plaster SR 7, or Repair concrete RKB

The boards are installed in a brick bond pattern and fixed to the substrate using Fescon Adhesive and surface render. The adhesive coverage must be 100%, which is ensured by applying the mortar both to the substrate and to the back of the board.

Install the boards so that the red-coloured side faces outwards.

Finishing

The boards are levelled with Fescon Adhesive and surface render., reinforced with Fescon Fibreglass mesh. After the finishing coat has dried, the surface is painted with Fescon Interior silicate paint.

For detailed instructions, refer to the Fescon SKL Silicate Board Installation Guide.

EU waste register: 060299

Materiaalimenekki

Approx. 4.3 boards / m²

Runkoaine Lime, sand
Väri White
Tiheys

Approx. 110 kg/ m3

Puristuslujuus

≥ 300 kPa

Vetolujuus

0,07 N/mm2 (70KN/mm2)

Palokäyttäytyminen A1 EN13501-1:2007+A1: 2009
Lämmönjohtavuus λD23/50 = 0.043 W/(mK) λdesign = 0.045 W/(mK)
pH 10-11
Vesihöyryn läpäisevyys

µ = 3

Koko

Board size / Packaging
Stock products
60 × 39 × 5 cm – 8 boards / pkg (18 pkgs / pallet 33.66 m²)
60 x 39 x 10 cm - 6 boards / pkg (12 pkgs / pallet 16.8 m2)
Custom-order products
60 x 39 x 6 cm - 10 boards / pkg (12 pkgs / pallet 21.06 m2)
60 x 39 x 8 cm - 5 boards / pkg (18 pkgs / pallet  16.85 m2)
60 x 39 x 12 cm - 5 boards / pkg (12 pkgs / pallet 14.05 m2)
60 x 39 x 14 cm - 4 boards / pkg (12 pkgs / pallet 11.23 m2)
60 x 39 x 16 cm - 3 & 4 boards / pkg (6 pkgs / pallet 9.83 m2)
60 x 39 x 18 cm - 3 boards / pkg (12 pkgs / pallet 8.42 m2)
60 x 39 x 20 cm - 3 boards / pkg (12 pkgs / pallet 8.42 m2)
Confirm the delivery schedule for custom-order products with Fescon customer service.

Vastuunrajaus, tuotteen käyttöön liittyvät huomiot ja rajoitukset: Tutustu Fescon Oy:n yleisiin toimitusehtoihin ja tuotteeseen liittyviin suunnittelu- sekä työohjeisiin.