Ota yhteyttä
020 789 5900 tai Lomakkeella
Tarjouspyyntö 0
Silicate board SKL
Silicate jamb board 500 x 250 x 15 mm
Adhesive and surface render KPL
Permabase plastering board
Side moulding for board plastering without mesh 2,5 m
Side moulding for board plastering without mesh
Bottom moulding for board plastering with mesh
Top moulding for board plastering
Expansion joint with fibreglass mesh
Expansion joint with fibreglass mesh
Ventilation profile for board plastering
Angle guide profile 5 mm
Socle moulding with mesh 6 mm
Socle moulding 10 mm for thin-layer plastering
Socle moulding 8 mm for thin-layer plastering with mesh
Water bar for thin plaster applications
Bordering moulding with mesh 6 mm
Fibreglass mesh
Corner bead 100 x 150 mm
Corner bead roll 90 x 110 mm
Stick-on corner moulding 6 mm
Stick-on corner moulding 10 mm
Stick-on corner moulding with mesh
Stick-on corner moulding 9 mm grey
Stick-on corner moulding with mesh 9 mm grey
Fescoterm aluminium profile
Drip moulding with mesh
Connector
Fescoterm plug fastener
Installation piece
Fastener for the Fescoterm thick-layer plastering system
Plaster mesh fastener RVK
Plaster mesh Tammet
« Takaisin tuoteryhmään

Silicate jamb board 500 x 250 x 15 mm

Kysy lisätietoa

Tuotekuvaus

Non-combustible, fibre-free and mineral-based thermal insulation board made of calcium silicate for window reveals in the silicate board system.

  • Excellent thermal insulation
  • Easy to work with
  • Capillary active
  • Vapour permeable
  • Ecological manufacturing process

Käyttökohteet

  • Thermal insulation and reinforcement of window reveals and other projections on interior walls constructed with the silicate board system
GTIN-koodi Tuotenimi Tuotenumero Pakkauskoko
SILIKAATTIPIELILEVY 500 x 250 x 15 MM 72108 ltk

Substrate

  • The substrate must be even, clean, load-bearing and suitable for bonding the boards.
  • Both the substrate and the boards must be moistened (to a matte-damp condition) before installation.

Board Handling and Installation

  • The boards are easy to handle. They can be cut with a handsaw and shaped using standard woodworking tools.
  • The boards are fixed to the substrate using Adhesive and surface render. The adhesive coverage must be 100%, which is ensured by applying the render both to the substrate and to the back side of the board.

Finishing

  • The boards are levelled with Adhesive and surface render, reinforced with Fescon Fibreglass mesh.
  • In window reveals, corner reinforcement is used to strengthen the outer corners.
  • After the finishing coat has dried, the boards are painted with Fescon Interior silicate paint.

Board Size / Packaging

  • 500 × 250 × 15 mm
  • 20 boards / box
  • Confirm the delivery schedule for custom-order products with Fescon customer service.

EU Waste Register: 060299

Materiaalimenekki

Approx. 8 boards / m²
Runkoaine Calcium silicate, cellulose fibre
Väri Light grey
Pakkauskoko 20 boards / box
Tiheys

Approx. 180 – 187 kg/m3
Puristuslujuus

≥ 1000 kPa
Palokäyttäytyminen A1 EN13501-1:2010
Lämmönjohtavuus λD23/50 = 0.059 W/(mK) λdesign = 0.062 W/(mK)
pH Approx. 10
Vesihöyryn läpäisevyys

Water vapour diffusion resistance factor μ = 3
Koko

Standard dimensions (L, W) 500 × 250
Board thickness 15 mm
20 boards / box
Vedenimukyky 46 kg/m²√h
Vastuunrajaus, tuotteen käyttöön liittyvät huomiot ja rajoitukset: Tutustu Fescon Oy:n yleisiin toimitusehtoihin ja tuotteeseen liittyviin suunnittelu- sekä työohjeisiin.