Ota yhteyttä
020 789 5900 tai Lomakkeella
Tarjouspyyntö 0
Protective paint
Silicone resin primer MC
Silicone resin coating MC
Piirto Silicone resin coating
Fescosan-Coating
Deeply penetrating primer
Silicone resin paint
Fescosan-Facade paint
Silicate Primer
Silicate facade paint
Silicate interior paint
« Takaisin tuoteryhmään

Silicate interior paint

Kysy lisätietoa

Tuotekuvaus

Fescon Silicate interior paint is a water-borne, SOL-silicate–based interior paint for mineral surfaces and previously painted interior surfaces.

  • Excellent coverage and water vapour permeability
  • Breathable
  • High covering power, up to 8 m² per 1 litre
  • Can be applied by roller or spray
  • Excellent cleanability
  • Contains no aromatic solvents
  • Full matt finish
  • Practically odourless even during application
  • Can be tinted to light shades

Käyttökohteet

  • All common mineral-based structures, typical plaster and filler surfaces, and previously painted surfaces
  • Interior surfaces previously treated with silicate-based or traditional interior paints
  • Not suitable for application on wood, silicone, or oil paints
  • Topcoat for silicate board systems
GTIN-koodi Tuotenimi Tuotenumero Pakkauskoko
6416841760302 SILIKAATTISISÄMAALI VALKOINEN 12,5 L 76030 12,5 l
SILIKAATTISISÄMAALI sävytys HR 1 Fescon värikartan sävyt 50330 12,5 l
SILIKAATTISISÄMAALI sävytys HR 2 muut sävyt 50331 12,5 l

Base

  • The substrate must be solid, clean and dry, and free from grease, wax, silicone, dust or any other layers that may impair adhesion.
  • New filler and plaster surfaces must be allowed to dry sufficiently before painting.
  • Protect the surrounding areas from splashes.
  • Clean any splashes immediately with clean water.
  • Substrates with uneven absorbency are recommended to be primed with Fescon Silicate primer.

Instructions for use

  • A test application should be carried out before starting work to ensure the correct colour shade.
  • The priming coat is applied once using Fescon Silicate interior paint diluted with clean water, max. 15%.
  • The topcoat is applied 1–2 times using undiluted Fescon Silicate interior paint.
  • During application and drying, the air temperature must be at least +8°C and the relative humidity must not exceed 80%.
  • The surface can be repainted after approx. 12 hours and is fully dry after approx. 4–5 days.
  • Clean tools with water immediately after use.
  • When spray painting, use a nozzle size of 0.017”–0.023” and a working pressure of 150 bar.

Maintenance instructions

  • A surface treated with Fescon Silicate interior paint can be cleaned with a damp cloth or a soft sponge.
  • Avoid excessive scrubbing.
  • Any damaged areas should be removed and repaired with suitable products.
  • Repainting is carried out using Fescon Silicate interior paint.

Varastointi ja jätteen käsittely
Katso erillinen varastointi ja hävitysohje https://www.fescon.fi/materiaalipankki

Materiaalimenekki

Approx. 0.125–0.15 l/m² per coat
Olomuoto Liquid
Sideaine Potassium waterglass
Väri Light shades from the Fescon colour chart
Maksimiraekoko

S1 < 100 µm (fine)
Pakkauskoko 12.5 l
Varastointi

Must be protected from frost. Do not store at a temperature of over +25°C
Tiheys

Approx. 1.58 g/cm³
Käyttölämpötila

+8°C...+25°C
Kuivumisaika

Surface dry and re-coatable after approx. 12 hours
Vesihöyryn läpäisevyys

Sd value class V1 (high), [m] < 0.01
Vedenläpäisevyys

Class W3 (low) < 0.10 kg/m²h⁰·⁵
Ilman suhteellinen kosteus Below 80%
Hiililäpäisevyys

C0 (no requirement)
Kuivakerroksen paksuus

E3 100-200 µ 0
Ohenne Water
Värisävyn kestävyys

A1 (BFS Notice 26)
Kiiltoryhmä

G3 matt
VOC-pitoisuus

< 1 g/l  EU limit value A/a: 30 g/l (2010)
Vastuunrajaus, tuotteen käyttöön liittyvät huomiot ja rajoitukset: Tutustu Fescon Oy:n yleisiin toimitusehtoihin ja tuotteeseen liittyviin suunnittelu- sekä työohjeisiin.