Deeply penetrating primer

Kysy lisätietoa

Tuotekuvaus

Fescon Deeply Penetrating Primer is a water-soluble, solvent-free, almost odourless, colourless primer with acrylic polymer resin binder for indoor and outdoor use. Used as a primer for Silicone resin paint and Fescosan-Facade paint on highly absorbent and/or weak mineral substrates.

  • Milky, colourless after drying
  • Good penetration depth
  • Reinforces the base
  • Solvent-free
  • Alkali-resistant
  • Permeates water vapour
  • High diffusion

Käyttökohteet

  • Masonry structures
  • Lime-cement and cement mortar renders
  • Concrete surfaces
GTIN-koodi Tuotenimi Tuotenumero Pakkauskoko
6416841760661 SYVÄPOHJUSTE 10 L 76066 10 l

Base

  • The substrate must be intact and dry.
  • Remove dirt, dust, cement paste and all loose material from the base.

Work instructions

  • Spread the well-mixed primer into a thin, even layer do not thin by more than 30%.
  • Work with a brush or a sprayer (nozzle 0.18-0.28 mm). The best result can be achieved by spreading the product with a brush.
  • Can be overpainted after 4-5 hours, depending on the conditions.
  • Wash tools and equipment with water immediately after use.

Varastointi ja jätteen käsittely
Katso erillinen varastointi ja hävitysohje https://www.fescon.fi/materiaalipankki

Materiaalimenekki

Smooth, normally absorbent plastering around 170 ml/m2

Olomuoto Liquid
Pakkauskoko 10 l
Varastointi

Must be protected from frost. Do not store at a temperature of over +25°C

Tiheys

1.01 g/cm3

Alin käyttölämpötila

+5°C

Kuivumisaika

4-5 h depending on the conditions

Ohenne Water
Levitystapa Brush, roller, spray
Kuljetus Warm transport
VOC-pitoisuus

Max. 30 g/l EU limit value for the product A/h 30 g/l (2010)

Vastuunrajaus, tuotteen käyttöön liittyvät huomiot ja rajoitukset: Tutustu Fescon Oy:n yleisiin toimitusehtoihin ja tuotteeseen liittyviin suunnittelu- sekä työohjeisiin.