Base
Cleaning and moisturising the installation base are carried out according to the normal working methods and the instructions of the designers.
Mixing
Refer to the bag for how much water the concrete requires. Add the dry material to the water and mix thoroughly. The mixing is usually done with a concrete mixer, but small amounts of concrete can also be mixed using a shovel. We do not recommend adding all of the water right at the start. Find the right plasticity by adding water during mixing. Do not add more water than the provided guidelines specify, because it reduces the strength of the concrete and increases its shrinkage. Finished concrete remains workable for approximately two hours.
Work instructions
Installation work is carried out according to the normal working methods and instructions of the designers. The lowest usage temperature is +5°C.
After treatment
If needed, aftercare by wetting and protecting by plastic which prevents excessive evaporation of moisture. The need for aftercare depends on the conditions. It should continue for at least two days.
Varastointi ja jätteen käsittely
Katso erillinen varastointi ja hävitysohje https://www.fescon.fi/materiaalipankki